ffmpeg is THE audio/video conversion tool. Unfortunately, the default build included in Ubuntu is usually quite outdated, as well as lacking support for many codecs.
The purpose of this article is to show you how you can build a fresh, up to date version of ffmpeg supporting (almost) all major codecs. This procedure was successfully performed on a vanilla Ubuntu 12.04 system.
0) Prerequisites
First, we need to enable the 'multiverse" repository in /etc/apt/sources.list, because that's where some of our external libraries live. All you have to do is uncomment the line similar to:
add deb http://eu-west-1.ec2.archive.ubuntu.com/ubuntu/ precise multiverse sudo apt-get update
Don't forget to refresh the repos:
$ sudo apt-get update
Then, we need to make sure that git and svn are installed. We'll need them to fetch source code.
$ sudo apt-get install git subversion
Let's also add some mandatory build tools:
$ sudo apt-get install build-essential nasm pkg-config
Now would be a good time to decide where you're going to build all those sources. Just create a temporary directory anywhere you like (you'll need about 150MB).
The x264 build requires a recent version of the yasm assembler. Let's take care of it:
$ sudo apt-get remove yasm
$ wget http://www.tortall.net/projects/yasm/releases/yasm-1.2.0.tar.gz
$ tar xvfz yasm-1.2.0.tar.gz
$ cd yasm-1.2.0
$ ./configure --prefix=/usr/local
$ make
$ sudo make install
$ yasm --version
yasm 1.2.0 Compiled on Aug 21 2013.
Done! One final note before we start building: if you have an existing installation of ffmpeg, you may run into linking issues caused by conflicting library versions. My advice is to remove all existing copies of libav* (libavcodec and so on) which may be present in /usr/lib, either by uninstalling them with APT or by deleting the .a and .so files.
1) Fetching the ffmpeg sources
First of all, let's get the latest ffmpeg source:
Of course, you could just go ahead with configure, make, make install and be done with it. Unfortunately, it's not that simple. Go ahead, run configure:
$ cd ffmpeg
$./configure --prefix=/usr/local
output removed
Creating config.mak and config.h...Take a closer look at the output, especially at the 'Enabled encoders' section. A number of major formats, like AAC, MP3, x.264 or XViD are missing. Can you live without these? Probably not...
Why, oh why are they missing? Take another look at the output of the configure command:
libfaac enabled no
libmp3lame enabled no
libx264 enabled no
libxvid enabled noThese encoders are missing because they're handled by external libraries which are not part of the ffmpeg source package. Chasing them all is a bit of a pain in the #$$ and hopefully this article will help!
Let's go wild and enable these additional encoders: AAC, MP3, Theora, Vorbis, x264, xvid, AMR, GSM. Let's also build shared libraries, which are useful if you're running multiple copies of ffmpeg:
$ ./configure --prefix=/usr/local --enable-gpl --enable-version3 --enable-nonfree --enable-shared --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfaac --enable-libgsm --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid
It will inevitably lead to something like:
ERROR: libfaac not found
3) Installing AAC, MP3, Theora, Vorbis, AMR, GSM
These are readily available in the Ubuntu repository, let's add them:
$ sudo apt-get install libfaac-dev libmp3lame-dev libtheora-dev libvorbis-dev libopencore-amrnb-dev libopencore-amrwb-dev libgsm1-dev zlib1g-dev libgpac1-dev
4) Installing libx264
x264 is a free library for encoding H264/AVC video streams. It can be installed with APT using 'apt-get install libx264-dev' but let's make sure we have both the latest ffmpeg and the latest x264.
So, let's fetch the x264 sources and build them:
$ git clone git://git.videolan.org/x264.git
$ cd x264
$ ./configure --prefix=/usr/local --enable-shared
$ make
$ sudo make install
Let's fetch the xvid sources and build them:
$ wget http://downloads.xvid.org/downloads/xvidcore-1.3.2.tar.gz $ tar xvfz xvidcore-1.3.2.tar.gz $ cd xvidcore-1.3.2/build/generic $ ./configure --prefix=/usr/local $ make$ sudo make install
$ ./configure --prefix=/usr/local --enable-gpl --enable-version3 --enable-nonfree --enable-shared --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfaac --enable-libgsm --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvidoutput removedCreating config.mak, config.h, and doc/config.texi...
$ make
$ sudo make install
$ sudo ldconfig -v
Cool, huh? Now, let's check this new ffmpeg:
$ which ffmpeg
/usr/local/bin/ffmpeg$ ffmpeg -encoders|grep -E "mp3|xvid|aac|gsm|amr|x264|theora|vorbis"
ffmpeg version N-55691-gca7f637 Copyright (c) 2000-2013 the FFmpeg developers
built on Aug 21 2013 15:44:17 with gcc 4.6 (Ubuntu/Linaro 4.6.3-1ubuntu5)
configuration: --prefix=/usr/local --enable-gpl --enable-version3 --enable-nonfree --enable-shared --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfaac --enable-libgsm --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid
libavutil 52. 42.100 / 52. 42.100
libavcodec 55. 29.100 / 55. 29.100
libavformat 55. 14.100 / 55. 14.100
libavdevice 55. 3.100 / 55. 3.100
libavfilter 3. 82.100 / 3. 82.100
libswscale 2. 5.100 / 2. 5.100
libswresample 0. 17.103 / 0. 17.103
libpostproc 52. 3.100 / 52. 3.100
V..... libx264 libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 (codec h264)
V..... libx264rgb libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 RGB (codec h264)
V..... libxvid libxvidcore MPEG-4 part 2 (codec mpeg4)
V..... libtheora libtheora Theora (codec theora)
A..X.. aac AAC (Advanced Audio Coding)
A..... libfaac libfaac AAC (Advanced Audio Coding) (codec aac)
A..... libopencore_amrnb OpenCORE AMR-NB (Adaptive Multi-Rate Narrow-Band) (codec amr_nb)
A..... libgsm libgsm GSM (codec gsm)
A..... libgsm_ms libgsm GSM Microsoft variant (codec gsm_ms)
A..... libmp3lame libmp3lame MP3 (MPEG audio layer 3) (codec mp3)
A..X.. vorbis Vorbis
A..... libvorbis libvorbis (codec vorbis)
7) Cleaning up (optional)
That's it for today :)